Natural Frequency Journal :: Issue No. 004
Published: November 01, 2007

RADIANCE and Daylight Factors

The freely available RADIANCE software is one of only a few lighting analysis tools able to accurately calculate illuminance levels on surfaces within a building model. This article explains how illuminance levels can be used to generate daylight factors in RADIANCE and presents a number of ways of doing this, including using ECOTECT as a modelling interface. It also shows how both illuminance levels and daylight factors calculated in RADIANCE can be read back and displayed interactively within your ECOTECT model.

Solar Shading Potential

Not all parts of a solar shading device are equally effective or even necessary. Techniques have been developed in ECOTECT to visually map variations in effectiveness over the actual geometry of a modelled shading device. These same techniques can be used during the design process to map shading potential over a proposed device or even to determine the best location for shading. This article explains the concepts behind these techniques and how they may be best applied.

Why Do Shading Calculations Take so Long?

Calculating detailed solar shading and overshadowing is a problem for most building analysis tools, ECOTECT included. It is important to a whole range of building performance criteria, from thermal and daylighting analysis through to solar access and rights-to-light. However, to do it properly can take a frustratingly long time. This article explains exactly what is happening during these calculations and offers tips on how to optimise the process and make best use of your existing shading data.

User login

View desktop or mobile version of site.